Gas Corrosion Test Cylinders provider for over 70 years worldwide. L-K Industries provides a full range of Gas Corrosion Test Cylinder like Test Cylinder, Cylinder Heaters. Designed especially for conducting the ASTM and N.G.P.A Copper Strip corrosion Test of Liquified Petroleum Gas. Conforms to ASTM D1838 and N.G.P.A standards.
|
Gas Corrosion
L-P
Test Cylinders
Heater
Tank
|
Test Cylinder
Cylinder Heater
Test Cylinder
Designed especially for conducting the ASTM and N.G.P.A. Copper Strip Corrosion Test of Liquefied Petroleum Gas. Conforms to ASTM "D1838" and N.G.P.A. "Publication 2140" standards.
Test Cylinder model LK-TB200 is made entirely of stainless steel and has an O-ring seal which will hold pressure when tightened by hand. No wrench is necessary. The O-ring can be easily removed for replacement. Needle Valves are also stainless steel and have 1/4" male pipe threads with union seats for standard gas fittings.
Featuring:
All Stainless Steel construction.
No Wrench necessary.
Built Tough to last.
Conforms to ASTM and N.G.P.A. standards.
Easy to Replace O-ring seal.
Approx. Shipping Weight: 3 lbs.
Shipping Size: 12" X 3" X 3"
MODEL LK-TB200
$ 295.00
Cylinder Heaters
Designed especially for conducting the ASTM and N.G.P.A. Copper Strip Corrosion Test of Liquefied Petroleum Gas.
Available in 12VDC or 115VAC, each unit will accommodate 4 corrosion test cylinders. Each heater is thermostatically controlled and factory set at 100°F. A built-in thermometer assures accuracy and confidence. This heater was designed and built for Class I, Group D, Division II areas.
Featuring:
12VDC and 115VAC models.
Will accommodate 4 Test Cylinders.
Thermostatically Controlled at 100°F.
Built-in Thermometer.
Explosion Resistant .
Approx. Shipping Weight: 45 lbs.
Shipping Size: 15" X 12" X 9"
Designed and Built for
CLASS 1, GROUP D,
DIVISION 2 AREAS
per CSA and US standards
12VDC
Test Cylinder Heater
MODEL # E-4-12-TH
$ 1470.00
115VAC
Test Cylinder Heater
MODEL # E-4-115-TH
$ 1470.00
Cylinder Heaters
Designed especially for conducting the ASTM and N.G.P.A. Copper Strip Corrosion Test of Liquefied Petroleum Gas.
Available in 12VDC or 115VAC, each unit will accommodate 4 corrosion test cylinders. Each heater is thermostatically controlled and factory set at 100°F. A built-in thermometer assures accuracy and confidence. This heater was designed and built for Class I, Group D, Division II areas.
Featuring:
12VDC and 115VAC models.
Will accommodate 4 Test Cylinders.
Thermostatically Controlled at 100°F.
Built-in Thermometer.
Explosion Resistant .
Approx. Shipping Weight: 45 lbs.
Shipping Size: 15" X 12" X 9"
Designed and Built for
CLASS 1, GROUP D,
DIVISION 2 AREAS
per CSA and US standards
12VDC
Test Cylinder Heater
MODEL # E-4-12-TH
$ 1470.00
115VAC
Test Cylinder Heater
MODEL # E-4-115-TH
$ 1470.00
Cylinder Heaters
Designed especially for conducting the ASTM and N.G.P.A. Copper Strip Corrosion Test of Liquefied Petroleum Gas.
Available in 12VDC or 115VAC, each unit will accommodate 4 corrosion test cylinders. Each heater is thermostatically controlled and factory set at 100°F. A built-in thermometer assures accuracy and confidence. This heater was designed and built for Class I, Group D, Division II areas.
Featuring:
12VDC and 115VAC models.
Will accommodate 4 Test Cylinders and Test Cylinder.
Thermostatically Controlled at 100°F.
Built-in Thermometer.
Explosion Resistant .
Approx. Shipping Weight: 45 lbs.
Shipping Size: 15" X 12" X 9"
Designed and Built for
CLASS 1, GROUP D,
DIVISION 2 AREAS
per CSA and US standards
12VDC
Test Cylinder Heater
MODEL # E-4-12-TH
$ 1470.00
115VAC
Test Cylinder Heater
MODEL # E-4-115-TH
$ 1470.00